{"id":59,"date":"2023-09-05T10:06:27","date_gmt":"2023-09-05T14:06:27","guid":{"rendered":"https:\/\/www.mackrobertson.com\/?p=59"},"modified":"2024-01-20T22:43:04","modified_gmt":"2024-01-21T03:43:04","slug":"penn-battle-iii-3-vs-spinfisher-vi-6","status":"publish","type":"post","link":"https:\/\/www.mackrobertson.com\/penn-battle-iii-3-vs-spinfisher-vi-6","title":{"rendered":"Penn Battle III 3 vs Spinfisher VI 6"},"content":{"rendered":"\n<p>As with all spinning reel comparisons, it can get complex very quickly when involving all the different reel sizes and variations. For the sake of simplicity in this comparison, we will be comparing the 2500 series size of the Penn Battle 3 and Penn Spinfisher VI. As you will see in the spec comparison below, the two spinning reels are near identical, but differ in two very important areas. The max drag is higher in the Spinfisher VI and the weight is lower in the Battle III. Besides the look, design, and feel of the two reels, these are the only technical differences. So if you\u2019re not worried about having that extra few lbs of max drag the Spinfisher VI offers and you would like to have a slightly lighter reel, you will want to choose the Penn Battle III. On the other hand, if you\u2019ll be fighting slightly larger fish and don\u2019t mine the extra weight and cost, the Penn Spinfisher VI should be your choice!<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Technical Specs and Comparison:<\/h2>\n\n\n\n<p>Penn Spinfisher VIPenn Battle IIISIZE25002500ANTI-REVERSE FEATUREInstant Anti-ReverseInstant Anti-ReverseBEARING COUNT66BRAKING SYSTEMNoneNoneDRAG MATERIALHT-100HT-100DRAG TYPEFront DragFront DragGEAR RATIO6.2:16.2:1MAX DRAG LB15lb | 6.8kg12lb | 6kgREEL SPOOL MATERIALAluminumAluminumSPARE SPOOL MATERIALNo Spare SpoolNo Spare SpoolWEIGHT10.7 oz9.7 ozIPX5 WATERPROOFYesNoFULL METAL BODYYesYes<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Comparison Video:<\/h2>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"Penn Battle III 3 vs Penn Spinfisher IV Spinning Reel Comparison\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/KzwXwToKgR8?feature=oembed&#038;enablejsapi=1\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p>Transcript: <\/p>\n\n\n\n<p>Hey guys, I just wanted to post a quick video, just really talking about the three main differences that truly are the only part that really matter when it comes to comparing the penn battle 3, versus the Penn Spinfisher VI. And really it&#8217;s the there&#8217;s one feature that I think is really the one that matters when it comes to these. I&#8217;ve been doing a bunch of research because they&#8217;re so similarly priced. I like both of them. I use both of them. Like what, what is the actual difference? Probably should have figured those out before I bought them. But anyways one, you know, and it depends on the real size. So you know, these, when there&#8217;s 3000 or 5,000, it&#8217;s going to change a little bit when you change the sizes. But in general, the max drag on the battle is a little bit less than the Spinfisher.<\/p>\n\n\n\n<p>Meaning the Spinfisher is going to be able to fight a little bit bigger of a fish. So in this particular size, it&#8217;s a three pound difference. Not a huge difference, but that is one of them. Okay. number two is going to be the weight. So the Spinfisher is slightly heavier. So some people would prefer to have the lighter reel. Some people would prefer to have the heavier reel, the heavier, one&#8217;s going to feel a little bit more quality, but it&#8217;s going to be a little bit heavier. I use both and I can say it is a notable, noticeable difference, but it really doesn&#8217;t mean anything to me. It&#8217;s not like gonna change the way I fish or make me tired at the end of the day. You know, it&#8217;s not that big of a difference. Here&#8217;s the big difference that I finally was like, oh, okay, I get it now.<\/p>\n\n\n\n<p>It&#8217;s this right here. It&#8217;s the, the IPX five sealed. Okay. So the,<\/p>\n\n\n\n<p>In this, you know, correct me if I&#8217;m wrong in the comments and definitely chime in, give me your, your info, your, your insights into this. But the<\/p>\n\n\n\n<p>Battle 3 is sealed, but<\/p>\n\n\n\n<p>It&#8217;s kinda like partially sealed, right? So from what I understand the battle three, if you&#8217;re like riding in the boat or you know, you&#8217;re standing in the surf and you get like a wave that hits this or, or spray that hits this, you&#8217;re all good. Like it&#8217;s good, you know, wash it off, keep it clean, take good care of it, but it&#8217;s not like it&#8217;s going to lock up the entire reel. If you just get a little bit of saltwater on this now from, from what I&#8217;ve read, if you are<\/p>\n\n\n\n<p>Technically reeling. So you&#8217;re reeling while a wave<\/p>\n\n\n\n<p>Hits this, there&#8217;s a chance that the salt water gets in there and kind of gums it up. Okay. Again, correct me in the comments if I&#8217;m wrong, but I&#8217;m pretty much are pretty sure that that&#8217;s the case now when it comes to the Spinfisher, because it&#8217;s literally like, this is a certification for being a waterproof. If it&#8217;s IPX five seal, that means that it can take everything that the battle could take in terms of the splashes and the waves and everything. And even if you are reeling, it&#8217;s probably not going to matter and get in there and mess things up. On top of that look up, you&#8217;ll have to Google IPX five in terms of like the specs, but it can literally go underwater. I think it&#8217;s to like one meter or something like that for X amount of minutes before it could possibly take on water.<\/p>\n\n\n\n<p>So obviously don&#8217;t hold this under salt water. No one&#8217;s going to do that, but like, let&#8217;s say it fell into the water or you accidentally like dropped your arm into the water or something. It&#8217;s, it&#8217;s not going to ruin the real, whereas that&#8217;s not guaranteed on the battle. So that certification means something. And that is the difference that really, I think, stands out in terms of helping you make a decision between these two, whether you want to pay the premium for the Spinfisher or not along with the max drag. So I just figured I&#8217;d post. If you guys have any comments, questions, insights, tips, anything like that, make sure to put them in the comments below and guys, please subscribe to my channel. I&#8217;m trying to grow this channel. I want to do lots of giveaways for these reels and all kinds of fun stuff. And I&#8217;m just trying to grow the channel. So every subscription matters at this point. Thanks guys.<\/p>\n\n<h2>Additional Questions<\/h2>\n<h3>What distinguishes the Penn Spinfisher VI from the Penn Spinfisher V?<\/h3>\n<p>When moving from the beloved Penn Spinfisher V to the newer version, the Penn Spinfisher VI, you&#8217;ll notice a myriad of enhancements. The Spinfisher V is well-regarded for its robust and water-tight design, complete with a robust drag system. It&#8217;s a faithful workhorse that many anglers swear by for its reliability. However, stepping up to the Spinfisher VI, Penn has introduced advanced technologies and improvements to provide a top-tier angling experience. One key bonus of the Spinfisher VI is the introduction of more precise gearing technology. This results in smoother performance and superior precision during retrieves, casting, and fighting fish. In addition, the bearing count has been increased, which, when combined with the improved drag system, ensures greater smoothness and power when you&#8217;re hooked up to a tough fish. So, in essence, the <b>Spinfisher VI is an evolution of the Spinfisher V, with a focus on refined performance and increased durability<\/b>.<\/p>\n\n<h3>What amount of drag does a Penn Spinfisher 6 deliver?<\/h3>\n<p>I&#8217;m afraid you&#8217;ve asked a slightly incomplete question. The specifics regarding the drag power of a Penn Spinfisher VI reel would largely depend on the specific model size as Penn offers several in this series. Each size variant has a different maximum drag specification as they are designed for different fishing situations. I recommend checking out the manufacturer&#8217;s website or contacting their customer service for the most accurate figure for your specific model.<\/p>\n\n<h3>What is the line capacity of a Penn Spinfisher VI 6500?<\/h3>\n<p>The Penn Spinfisher VI 6500 is a phenomenal mid-sized reel that holds a substantial amount of line depending on the line type and pound test you&#8217;re using. For mono lines, it can accommodate 390 yards of 12-pound, 345 yards of 15-pound, or 205 yards of 20-pound test. If you prefer to spool it with braided line, the capacity increases to 485 yards of 30-pound, 410 yards of 40-pound, or 335 yards of 50-pound braid. The increase in braid capacity caters to modern saltwater spinning reel applications where higher line capacity and strength are often needed. As a result, the <b>Penn Spinfisher VI 6500 can cater to a variety of fishing techniques and species due to its versatile line capacities<\/b>.<\/p>\n\n<h3>How do the Battle 3 and Battle 3 DX differ from each other?<\/h3>\n<p>Both Battle 3 and Battle 3 DX are popular options in the Penn lineup, but there are a few key differences to note. The battle isn&#8217;t just in the name, it&#8217;s in the features and materials used. One major difference between the two is in the internal gear materials. The Battle 3 DX, the newer model, has decided to go for strength and long-lasting performance with the use of a brass pinion and main gear across all sizes. This contrasts with non-DX variants where sometimes different materials are used. Additionally, Penn opted to include an extra sealed stainless steel bearing in the Battle 3 DX, offering even more smoothness and support when reeling in your catch. These adjustments result in <b>increased longevity, strength, and smoothness in the Battle 3 DX compared to the original Battle 3<\/b>.<\/p>","protected":false},"excerpt":{"rendered":"<p>As with all spinning reel comparisons, it can get complex very quickly when involving all the different reel sizes and variations. For the sake of simplicity in this comparison, we<\/p>\n","protected":false},"author":1,"featured_media":300,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"om_disable_all_campaigns":false,"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[654],"tags":[],"acf":[],"_links":{"self":[{"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/posts\/59"}],"collection":[{"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/comments?post=59"}],"version-history":[{"count":1,"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/posts\/59\/revisions"}],"predecessor-version":[{"id":13930,"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/posts\/59\/revisions\/13930"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/media\/300"}],"wp:attachment":[{"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/media?parent=59"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/categories?post=59"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mackrobertson.com\/wp-json\/wp\/v2\/tags?post=59"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}